HPDs published under versions 2.0, 2.1, 2.1.1 or 2.2 of the HPD Open Standard may be upgraded to the current version of the HPD Open Standard: version 2.3.
- Log in to HPD Builder.
- Go to your Dashboard > Open Workspace > Record > Upgrade to v.2.3
- Click on the new record and look for the "Compliance" button at the top right of each section to find fields that need updating or suggestions for improvement. The color of the "Issues" button shows the status of the section:
Issues the section is compliant and ready to publish
Issues there are suggestions for improvement, but the HPD can still be published
Issues there are issues that must be fixed before the HPD can be published
4. Update the HPD per Compliance Check requirements. Refer to the instructions in the HPD Builder, and to HPD Open Standard v2.3 and Best Practices for further guidance on sections that need to be updated.
5. Review the "Weight" button. If green, you are good to go. If red or yellow, click on the button for more details, then update content inventory % values accordingly to make sure they are aligned with the requirements of the Weight Quality Inspector.
6. Go to LEED & Program PreChecks to PreCheck HPD for LEED and other programs.
7. Go to Section 6: References and Publish your v2.3 HPD! Then go back to the product page and click on the "Repository" tab to download your HPD.
We strongly recommend becoming familiar with the details of the latest HPD v2.3 by downloading and reading the HPD v2.3 standard, and by reviewing this FAQ.